1" (25.4 mm) Handlebars
Designed according to the Motto: Less is more! In this case definitely less hoses.
These bars are designed so that not just the cables, but also the hydraulic lines can be run inside them.
The bars can come with the Zero Cool® internal twist grip so that the throttle cable runs internally.
The Zero Cool® "Pure" is a bare version which allows the fitting of conventional hand controls.
Both versions have "Risers" with 1/2" UNF threaded holes (Bolts have to ordered separately).
We recommend different fastenings with the full version: S/steel bolts with a M18 x 1.5 external thread & drilled out to 10mm internal diameter. They’re supplied for an additional charge as a pair, with galvanized nuts welded in place. Topped off with s/steel M18 domed nuts.
Handlebar Measurements
When ordering we need these numbers. And don't forget the model & year.
Like this:
Width: 850 mm. Height: 100 or 150 mm
Stretch: 100 or 150 mm Angle: 30° or 45°
These bars are designed so that not just the cables, but also the hydraulic lines can be run inside them.
The bars can come with the Zero Cool® internal twist grip so that the throttle cable runs internally.
The Zero Cool® "Pure" is a bare version which allows the fitting of conventional hand controls.
Both versions have "Risers" with 1/2" UNF threaded holes (Bolts have to ordered separately).
We recommend different fastenings with the full version: S/steel bolts with a M18 x 1.5 external thread & drilled out to 10mm internal diameter. They’re supplied for an additional charge as a pair, with galvanized nuts welded in place. Topped off with s/steel M18 domed nuts.
Handlebar Measurements
When ordering we need these numbers. And don't forget the model & year.
Like this:
Width: 850 mm. Height: 100 or 150 mm
Stretch: 100 or 150 mm Angle: 30° or 45°
